Model EL655 - Programmable Inversion Tumbler
The EL655 Programmable Inversion Tumbler is designed to mix wet or dry samples, gently for suspensions, culturing and dry blending or more aggressively by programing the tumbler to rotate clockwise stopping and then rotating counterclockwise. It is useful in keeping insoluble particles in suspension to minimize the introduction of air into the solution, dry blending powders as well as aggressively agitating chemicals. In addition, it can also be used in liquid/liquid extractions in situations where typical vigorous shaking is inappropriate (i.e. if you don't want to introduce air into the solutions). The EL655 Programmable Inversion Tumbler can also be used to blend dry powders. The standard unit accepts 6 bottles or jars up to 7" in height. An interlocked safety switch on the door is supplied with the unit along with a new upgraded aluminum plate base with integrated handles for ease of moving.
Stainless steel sanitary models available, please call for pricing.
0 - 100 rpm
Forward and Reverse
Max Load Capacity:
Unbalanced: 5 lbs | Balanced: 34 lbs
Max Container Capacity:
6 Jars/Bottles up to 7" tall and 3" in diameter - Custom Options available
115V or 230V @ 50/60hz
Length - 37 in | Width - 12 in | Height - 15 in
EL655.S - Programmable Inversion Tumbler
115V Power Unit. Stainless Steel Panels with Powder Coated Steel.
EL600.A.12B - 12" Red Bungee Cord
For Use with EL655 and EL660 Tumblers.
EL655.25.S - Programmable Inversion Tumbler
230V Power Unit. Stainless Steel Panels with Powder Coated Steel.
Liquid and Oil Mixing
Blending Dry Powders