Eberbach E3703 Series Variable Speed Heavy Duty Cutting Mills
The E3703 Large Benchtop Cutting Mill features a 7.75 inch diameter sealed cutting chamber with six stationary blades and a rotating cutting head with four replaceable cutting blades that revolve at high speed to produce a shearing action which minimizes heat build-up. The R6 Model includes a 6 bladed rotating cutter head instead of the standard 4. The additional blades allows for faster sample processing and throughput.
Samples introduced through the hopper are swept around by the rotor until they are cut to sufficient fineness to pass through sieve. The hard, tool steel cutting edges on the blades allow milling of a wider range of materials, including plastics, animal feed, bones, cables, cardboard, electronic scrap, feed pellets, foils, food, leather, material mixtures, non-ferrous metals, paper, pharmaceutical products, refuse derived fuels, rubber, waste, wood and so much more. The blades are also available in 316 Stainless Steel, for use when milling potencially corrosive samples, and Tungsten Carbide, for milling harder samples.
The E3703 is designed with a machine tool type of cartridge spindle and a small powerful servo motor which allows for variable speed operation of 0 - 1200 rpm (2500 at 230V) with high torque. The chamber door comes standard with a door safety switch. The machine comes standard with mounting locations for bolting directly to a benchtop or an optional table top stand or floor stand can be purchased.
E3703 is supplied with the following; 1x Plunger, 1x Hopper, 3x Sieves (0.5mm, 1mm & 2mm), 1x Jar adaptor, 3x 16oz glass jars, 1x Tool set, 1x rotating cutter head with 4x rotating blades (6 with the R6 model), 6x stationary cutting blades, and 1x brush.
Please contact Eberbach regarding your comminution applications needs.
Cutting Mill with Powder Coated Chasis, Tool Steel Cutting Chamber with 6 Stationary Cutting Blades and a 4 Bladed Rotating Cuttter Head.
Cutting Mill with 316 Stainless Steel Chasis, Cutting Chamber with 6 Stationary Cutting Blades and and a 4 Bladed Rotating Cuttter Head.
Cutting Mill with Powder Coated Chasis, Tool Steel Cutting Chamber with 6 Stationary Cutting Blades and a 6 Bladed Rotating Cutter Head.
Cutting Mill with 316 Stainless Steel Chasis, Cutting Chamber with 6 Stationary Cutting Blades and a 6 Bladed Rotating Cutter Head.
Auto Feed Models:
Large capacity cutting mill with auto feed hopper which allows you to load the mill, set the programmable controller to the speed you want and press the start button allowing you to walk away and come back with the process completed. The new patented feed system is designed with high torque servo motors for handling difficult materials, such as clumping, fluffy, cohesive, dense as well as free flowing materials. The E3703.AF.SS offers the same conveniance as the standard model, but constructed in Stainless Steel. If you have labor intensive or feeding issues like clumping, bridging, arching, rat holing or other issues, the new Rotary Hopper is the right system for your application.
0 - 1200 rpm @ 115V | 0 - 2500 rpm @ 230V
Sample Input Size:
Volume Dependent on Sample - Contact us for details
Powder Coat Steel or Stainless Steel
316 Stainless Steel
115V/230V @ 50/60hz - Dual Voltage
Dimensions (without stand):
Length - 26 in | Width - 22 in | Height - 22 in
Temp sensor, Tungsten Carbide Blades, Tool Free Push To Release Cutter Head, Data output via Ethernet, Profibus or other. (contact us for details)
Choose Your Model
E3703 - Heavy Duty Variable Speed Cutting Mill
Powder Coated Steel Model - Stand Sold Separately
E3703.SS - Sanitary Stainless Steel Cutting Mill
316 Stainless Steel Model - Stand Sold Separately
E3703.AF - Heavy Duty Variable Speed Cutting Mill with Auto Feeder
E3703 Mill With Integrated Auto Feed System
Accessories and Spare Parts
E3700.A.ST - Mill Stand
Available in Powder Coat Tool Steel or Stainless Steel. Complete with Casters
E3700.A.HP.HF.SS - High Flow Hopper
Designed for the E3700 series mills.
E3700.A.PL - Mill Plunger
Available in Wood or PTFE
E3700.A.S05 - S8 - Sieves
0.5mm - 8mm 316 Stainless Steel Sieves.
E3700.A.RCH - Rotating Cutter Head
Replacement part for E3703 Series Mill with 4 cutting edges.
E3700.A.RCH6 - Rotating Cutter Head
Replacement part for E3703 Series Mill with 6 cutting edges.
E3700.A.KT - Blade Gapping Tool
Used to properly gap mill knife blades.
E3700.A.RB - Rotating Blade Set
4 Replacement Blades in Tool Steel, Stainless Steel, and Tungsten Carbide.
E3700.A.SB - Stationary Blade Set
6 Replacement Blades in Tool Steel, Stainless Steel, and Tunsten Carbide.
E3703 Cutting Mill Shown With Optional Stand and High Flow Hopper
E3703.SS - Sanitary Stainless Steel Cutting Mill Shown With Optional Stand
E3703.AF Heavy Duty Cutting Mill with Auto Feeder